Garment dyeing and finishing

After the dyeing process is completed, J-Kemiwash NTP enzyme is added in the same bath to make the washing effect more obvious and wash out soft tones and seam lines. The welts and protruding parts can show a strong friction effect.

The dyeing process of ready-made garments (polyester fiber and cotton blend) is divided into two dyeing processes. First, dye the polyester fiber, (if necessary ) is used to dye cotton with reactive dyes. Denim garments used in chemical fiber/cotton blends can be stone-milled or enzyme washed and softened after dyeing to add uniqueness to the garment. Garment-dyed garments can show two bright and vivid colors, It can be matched with different colors, so that the cross effect has a strong contrast or a soft effect. The above garment dyeing process can be completed in a medium-temperature and ordinary washing machine

Introduction to dyeing methods:

Ready-made garments Dyeing (G.D): White garments are dyed to achieve the color and effect required by the customer.

Chemical stone washing + dyeing (CT-STAIN): Plaid garments are chemically stone washed, then dyed, and then washed to achieve an aged effect.

Over DYE: After the plaid garments are dyed, the original color and effect are changed.

　CROSS DYE

Tie-dye (TIE DYE): White garments or dyed garments are tied with ropes in a special way and then dyed to obtain a special pattern effect.

Hanging dyeing (DIP-DYE): white garments or dyed garments are hung on special racks and dyed through manual operation to obtain a dyeing effect of light top and dark bottom, with uniform color transition.

ILLUSION DYE

CLOUD DYE

Drying work

1. Set the drying method according to the characteristics of the clothes and customer requirements.

　2． Dry clothes of different colors in separate cylinders. If the clothes being dried have fading, the dryer must be cleaned before drying another color

to prevent the clothes from staining. 3. The drying temperature must be determined by the administrator, who shall notify the person in charge of drying, and record the drying time clearly. The decision shall be made according to different fabrics and clothing sizes. The cold air time shall be determined according to the feel required by the customer. The cold air time range is: 0-4 hours. Inside.

4． After receiving the washed shrink cloth, it should be dried together with the bulk goods. After drying, it should be placed in the shrinking room to be loosened and the time of starting loose cloth should be recorded in the loose cloth record book.

5． After drying, if the team leader confirms that the clothes are OK, 10 pieces of clothes will be tied up and separated into separate sheets and placed in the post-wash and dye area before being sent to QC for collection.If the dried clothes are not OK after being confirmed by the team leader, they will be marked and recorded clearly, and they will be sent away after they are reworked until they are OK.

6. Drying method: High temperature drying: above 90℃

Medium temperature drying: 80℃—90