Outdoor Sports garment Manufacturer Outdoor Clothing News The function of the shuttleless loom temple support device and the conditions it should meet

The function of the shuttleless loom temple support device and the conditions it should meet



The function and conditions of the shuttleless loom temple support device The temple thorn shaft is a necessary component of the loom required by the weaving process. It must be eq…

The function and conditions of the shuttleless loom temple support device

The temple thorn shaft is a necessary component of the loom required by the weaving process. It must be equipped on both shuttle looms and shuttleless looms. However, shuttleless looms are more demanding.
1. The function of the temple support device of the shuttleless loom
During the weaving process of the fabric, due to the tension of the warp and weft yarns, the fabric width shrinks, resulting in a difference in the fabric width and the reed width at the weaving mouth. , cannot reach the predetermined effective width of the cloth, and causes the warp yarns to have a large inclination, which increases the friction between the side warp yarns and the reed blades, increases the breakage of the side warp yarns, and deforms and damages the side reed blades. The greater the tension of the fabric, the greater the impact on the reed, and the corresponding warp yarn breakage rate also increases. Installing the temple device mainly controls the shrinkage of the fabric at the cloth fell to achieve the predetermined effective width of the fabric, and Reduce edge warp breakage and edge reed blade deformation and damage.
2. The conditions that the shuttleless loom temple support device should meet in the weaving process
The shuttleless loom temple support device of various models should be matched with the corresponding temple support box, and the temple support box should make the fabric In contact with the circular surface of the temple device, the covering arc surface formed by it should be able to control the shrinkage of the fabric. The copper thorn ring, rubber roller, steel licker-in and other requirements on the temple device (concentric copper thorn ring as shown in the figure) As shown in Figure 12-1, the rubber roller is shown in Figure 12-2, and the steel licker-in roller is shown in Figure 12-3), the operation is sensitive, the thorns are sharp, and there are no hooks or broken ends. The exposed height should be reasonably matched according to the thickness of the fabric. , from low to high, can firmly hold the fabric during operation without damaging the surface of the fabric, and effectively hold the edge of the fabric to prevent it from shrinking. The threads and thorn tips on the rubber roller and steel licker-in should be spiral The thorn path on the copper thorn ring should be circular, which can achieve the predetermined lifting effect according to the angle change of the thorn ring seat.




AAAGFHJTYJUTI

Extendedreading:https://www.yingjietex.com/product/Full-dull-NyLon-Ripstop-Fabric.html
Extendedreading:
Extendedreading:
Extendedreading:
Extendedreading:
Extendedreading:
Extendedreading:
Extendedreading:
Extendedreading:
Extendedread

This article is from the Internet, does not represent 【www.garment-china.com】 position, reproduced please specify the source.https://www.garment-china.com/archives/7770

Author: clsrich

 
TOP
Home
News
Product
Application
Search