Use of electronic weft selection device
Use of electronic weft selection device There are many types of electronic weft selection devices, and the specific adjustment methods are determined by the overall structure of th…
Types and technical performance of electronic weft selection devices
Types and technical performance of electronic weft selection devices With the advancement of science and technology, electronic technology has been widely used. The automation leve…
Use care and maintenance
Use, care and maintenance 1. Use (1) LASER/NOVA type weft feeder is equipped with front and rear tensioners. When using, the clamping tension should be adjusted according to the ch…
Weft storage control
Weft storage control The weft storage control is completed by the weft storage detection sensor on the weft storage drum and the central microprocessor. Controls such as weft pre-w…
Tension device
Tension device In addition to the tension device at the yarn entry point, the aforementioned weft feeder is also equipped with tension devices at the spinning yarn and drum surface…
stop device
Stopping device 1. Electrical contact stop device (1) Type: Electrical contact type. (2) Warp stop piece: electrical contact type warp stop piece. (3) Number of stops: 2 to 8. (4) …
Winding guide and unwinding
Winding guide and unwinding Spinning yarn must be wound onto the drum in a spiral shape. For this purpose, a winding leisure and a yarn guide leisure are required. There are two ty…
Model technical specifications of the stop plate
Model technical specifications of the stop plate Model indication of warp stop pieces Most shuttleless looms use electrical warp stop pieces. The models include EGU type, EOU type,…
Maintenance and management of stop plates
Maintenance and management of stop tablets 1. Maintenance of the warp stop discs (1) When the machine is shut down, the warp stop discs must be properly transported into the heald …
The use of menstrual tablets
Use of menstrual tablets There are two types of stop pieces used in shuttleless looms: open type and closed type. For closed-end warp stops, use a heddle threading hook to guide th…